Polylab Beakers, moulded in Polypropylene, have excellenct clarity and very good chemical resistance. The autoclavable beakers have prominently raised graduations on the outer surface. Pouring a solut....
Click for More Information .....

This Burette has a transparent acrylic body and a leakproof stopcock fitted with a self lubricating PTFE plug. Each Burette is individually calibrated to give maximum accuracy. Acrylic body is unaffec....
Click for More Information .....

This is a fast release pipetting device for precise pipetting & zip quick emptying. The Knurled thumbwheel can be rotated to draw up or dispense liquids while the releaser may be pushed in for zip....
Click for More Information .....

Blown in Low Density Polyethylene, this bottles dispense small uniform drops of liquids when pressed lightly. Particulars Packing 60 ml. 12 Pcs. 125 ml. 12 Pcs. ....
Click for More Information .....

This Centrifuge tubes with conical bottom are available in two sizes i.e. 15ml & 50ml. Moulded in Polypropylene, these tubes are clear, strong & safe. These autoclavable tubes are provided wit....
Click for More Information .....

Centrifuge Tubes with round bottom are moulded in Polypropylene & Polycarbonate. These tubes have excellent clarity and are strong enough to be used upto 50,000xG. These tubes can be autoclaved, h....
Click for More Information .....

Oak Ridge Centrifuge Tubes, made of Polypropylene, have excellent contact clarity and can be used upto 50,000xG. The screw cap is fitted with silicon O-Ring making it totally leakproof. These tubes sh....
Click for More Information .....

Sample Containers are made of Polypropylene. These thin walled, disposable containers are easily screw capped with less than 1/4" of a rotation. As one screw caps the container, the top of it set....
Click for More Information .....

These Polypropylene/Polystyrene tubes are generally used in RIA, Coagulationa and Bacteriology. The Polypropylene tubes are clear and can withstand 3000 RCF during Centrifugation while the transparent....
Click for More Information .....

This transparent polypropylene cap for Test Tubes proves to be an excellent protection to the contents to the tubes. The grooves inside the cap tighten the fitting on the tube while the outer grooves ....
Click for More Information .....

As the name suggests, these vials are commonly used for storage of biological material, human & animal cells at temperature as low as -190o. The Cap is provided with a built in seal ring making th....
Click for More Information .....

These polypropylene vials add to the existing range of Polylab storage vials. Available in 5 ml. & 10 ml. capacities, these vials have polypropylene cap with built in seal ring making it a leakpro....
Click for More Information .....

These unbreakable vials, moulded in Polyethylene, are fitted with leakproof screw caps. These vials can be used with standard counting equipment for liquid scintillation system and are excellent for l....
Click for More Information .....

These Racks for Scintillation Vials, moulded in Polypropylene, are autoclavable & corrosion resistant. There is an individual rack for both 8 ml. & 20 ml. vials. These rugged & stable rack....
Click for More Information .....

Cyro vials are normally used for storage of Biological material, human & animal cells at temperature as low as -190oC. These sterilized tubes are provided with white, prominent graduations and a l....
Click for More Information .....

These Coders available in different colours can easily fit into the cap of cryo vials for colour identification of different samples.Particulars Packing Cryo Coders 100 Pcs. ....
Click for More Information .....

Cyro Rack is moulded in Polycarbonate making it tough, durable & autoclavable. This handy rack can hold 50 vials at a time. The unique feature of this rack is that vial can be unscrewed without ac....
Click for More Information .....

Cryo Boxes are moulded in Polycarbonate making it extra strong and autoclavable. These can accomodate Cryo Vials of up to 4.5 ml. capacity and are designed to be used at temperatures ranging from -190....
Click for More Information .....

These unique boxes are moulded in Polypropylene and are therefore autoclavable. The box itself is clear providing an excellent view of the tips inside while a table like structure is provided inside t....
Click for More Information .....

ELISA/ASSAY plates are made of optically clear, non-toxic Polystrene. These plates with 96U bottom or flat bottom wells bear alpha numeric index. Uniform placement of all the well facilitate use of mu....
Click for More Information .....

Volumetric Flasks, blown in Polypropylene, are stron, unbreakable and have good contact clarity. These autoclavable flasks are provided with screw caps to prevent leakage. Particulars Packing 25 ml. 6....
Click for More Information .....

These transparent, ready to use, disposable Petri Dishes are made of optically clear, non-toxic, Polystyrene. These Petri Dishes packed individually in polythylene bags are sterilized by radiation/E.T....
Click for More Information .....

This Rack is a clear acrylic construction with white Polycarbonate Posts. It has a capacity to hold 60 petri dishes of 90 mm size. This rack is very useful during incoluation, incubation & Storage....
Click for More Information .....

This autoclavable Stand is perhaps the most commonly used Test Tube Stand in various laboratories. For better visibility, this 6 place rack is end supported by 2 columns. The top plate has 2 holes for....
Click for More Information .....

A handy, little, space saver, this circular twelve place Polypropylene Test Tube Stand has four 25 mm dia holes & eight 19 mm dia holes in its top plate. The base has matching hemispherical wells ....
Click for More Information .....

These ingenious racks with a 3-tier design provide clear view of the tube contents & convenient insertion & removal of tubes. The PC rack has transparent upper & middle plates where as in PP racks, e....
Click for More Information .....

These ingenious racks with a 3-tier design provide clear view of the tube contents & convenient insertion & removal of tubes. The PC rack has transparent upper & middle plates where as in ....
Click for More Information .....

Moulded in Polycarbonate, this autoclavable rack is made for holding twenty four 1.5 ml. micro centrifuge tubes. This rack has a unique stacking feature which prevents movement in any direction. The h....
Click for More Information .....

An economical substitue for wire racks, here are these submersible, autoclavable racks which are stackable when empty. These are available in different colours and are made of a special blend of Polyp....
Click for More Information .....

Test Tube Baskets are made of Polypropylene. These autoclavable, unbreakable and non-corrosive baskets are ideal for rinsing & draining glassware. These are also useful for storage of test tubes o....
Click for More Information .....

This detachable stand can hold 12 pipettes, 6 on each side, in a horizontal position. Moulded in Polypropylene, this autoclavable stand has two sides which are attached to each other with three metall....
Click for More Information .....

This is a stable, non-corrosive, detachable stand which can hold 28 pipettes with maximum dia 14 mm. The heavy base measures 225 mm in diameter and a Polypropylene coated square rod measuring 375 mm i....
Click for More Information .....

Moulded in Polypropylene, this unique stand holds a maximum of 94 pipettes and rotates on a central vertical axis for convenient selection of any particular pipette. The lower rotating disc has four c....
Click for More Information .....

Measuring Cylinders, moulded in Polypropylene, are single piece cylinder. These autoclavable cylinders have raised prominent graduations for easy reading and have excellent contact clarity. The broad ....
Click for More Information .....

These handy jugs, moulded in Polypropylene, are clear, autoclavable and have good chemical resistance. These jugs are provided with a handle for easy & convenient lifting and have raised graduatio....
Click for More Information .....

These Conical Measures are very good for measuring small quantities of reagents. Moulded in Polypropylene, these autoclavable measures have a hexagonal base which provides it excellent stability. The ....
Click for More Information .....

These Funnel is made of Polypropylene, giving excellent contact clarity and strength. The pear shaped, autoclavable seperating funnel has a leakproof threaded screw cap. The Polypropylene stopcock, fi....
Click for More Information .....

Moulded in Polypropylene, Spatula consists of a spoon on one side while the other end is a flat construction with a knife edge. This edge is helpful in breaking up crystals of different salts while th....
Click for More Information .....

These Troughs, made of polypropylene, are autoclavable and are available in different sizes. These can be used for a wide range of purposes including storage, sterilizing & drying labware etc.Part....
Click for More Information .....

These pots are moulded in Polypropylene, are available in four different sizes. These pots have a downward extended rim which provide convenient lifting even if the pot is filled. The bottom of the po....
Click for More Information .....

This tray is moulded in polypropylene is a multipurpose tray that can be used for sterilizing, drying glassware, porcelainware and other laboratory instruments. These steam autoclavable trays have tap....
Click for More Information .....

Magenta Box is very often used in tissue culture & agricultural research experiments. Main body of this box is made of tough & transparent Polycarbonate which provides excellent view of the co....
Click for More Information .....

These Storage Boxes, made of Polypropylene, prove to be an excellent option for storage of different powdered reagents & other material in the laboratory. Square shape of these boxes help in savin....
Click for More Information .....

These narrow mouth Reagent Bottles are available in Polypropylene as well as Polyethylene. The PP bottles are rigid, translucent and have excellent contact clarity. These bottles can be autoclaved fil....
Click for More Information .....

Polylab Aspirator Bottles are made of Polypropylene and are therefore much lighter than glass. These are autoclavable durable and dependable. The leakproof spigot screwed to the bottle body requires o....
Click for More Information .....

These self priming Syphons can be sued for pouring liquids from large containers to samll ones without actually lifting them. Insert the open end of the tube in the liquird, close the stop cock and pu....
Click for More Information .....

Simple Cell Pot, as the name suggests, is used for making Simple Cells & Voltmeters etc. Moulded in Polypropylene, this pot has very good contact clarity and excellent chemical resistance. Being i....
Click for More Information .....

Blown in Polypropylene, this pot is used for making Leclanche Cell. This pot too has very good contact clarity & excellent chemical resistance. Particulars Packing Leclanche Cell Pot 12 Pcs. ....
Click for More Information .....

Made of polypropylene, these disposable containers are used for collecting samples of sputum or urine etc. Graduated on the outer surface, these containers have cap that work in a press & fit mann....
Click for More Information .....

Made of polypropylene, these stirrers are very useful for stirring different solutions in the laboratory. These stirrers prove to be tough and long lasting. Particulars Packing o-10 mm. x h-250 mm. 12....
Click for More Information .....